Punch metal, stretch metal and CNC facade prices in 1405
Perforated metal facades (punch, stretch, CNC) cannot be priced 'per meter' the way composite can, because the pattern, hole density and sheet thickness change everything. Still, to give you a starting point, we have tabulated the Aban 1405 ranges: pattern processing 2 to 4 million, oven paint 1.3 to 1.7 million and substructure and installation 2.5 to 3 million Toman per m².
All prices are approximate, based on the company's supply rates (Namakaran Fakher Engineering Co.) and the Aban 1405 (Oct–Nov 2026) survey, with Tehran as the base; all rates exclude VAT. Daily material prices change and a firm figure is issued only with a detailed estimate for your project — all numbers must be re-confirmed at contract time.
The steel sheet itself is calculated separately and follows the daily market price per kilogram (steel table on this page). Dense patterns need both more sheet and more machine hours; that is why two punch patterns can differ twofold.
Our suggestion: before ordering, discuss the pattern with us. With a small change in density or module repetition, the cost can usually be reduced without hurting the look.
Punch metal, stretch metal and CNC
Aban 1405 (Oct–Nov 2026)Fabrication and paint labor is at the company's rate; the steel sheet itself (e.g., stretch-metal sheet with a known weight) is priced by kilogram from the steel table.
| Item | Unit | Approx. range (Toman) |
|---|---|---|
| Punch and CNC fabrication labor | m² | 2,000,000 to 4,000,000 |
| Double-coat oven paint (both sides) | m² | 1,500,000 |
| Metal substructure + fabrication and installation | m² | 2,500,000 to 3,000,000 |
Steel and facade substructure
Aban 1405 (Oct–Nov 2026)Priced per kilogram. Substructure weight ranges from roughly 6 to 10 kg per m² of facade depending on the system.
| Item | Unit | Approx. range (Toman) |
|---|---|---|
| Facade substructure — box profile, profiles and 2 mm sheet | kg | 165,000 |
| 15×15 perforated plate (5 or 6 mm) | pc | 400,000 to 500,000 |
| Jenny anchor | pc | 280,000 to 350,000 |
What pushes the price up or down?
Prices in Tehran and other cities
A large part of this work is done in the factory; in other cities only on-site installation remains and the price difference is usually small.
Prices in Tehran
Tehran is the base of our pricing. Glass and aluminum factories and professional installation crews are all here, so transport costs are low and finding a team is not hard. For high-rise towers, access costs (lifts, suspended platforms) are quoted separately in the estimate.
Iran Mall, Aftab 22 and several other residential towers are among our reference projects in Tehran. Whenever you like, you can visit one of our active sites — all the photos on this website are from real projects too.
Prices in Karaj & Alborz
Karaj and the surrounding towns (Mehrshahr, Fardis, Andisheh) are close to Tehran; the price difference from Tehran is usually small and crew commuting is easy.
Karaj's key technical issue is wind. At height, wind load and the wind-bracing detail must be engineered seriously; this affects the amount of profile and fixings and, ultimately, the price.
Common questions about pricing
Other price pages
Related links
An exact estimate for your project
The tables are the starting point. Send your facade drawing and a few lines of description and we will provide a detailed, firm estimate — free and with no obligation.