Curtain wall price in 1405 — approximate per-m² table
We hear the question 'How much is curtain wall per meter?' every day. The blunt answer: about 6.5 to 18.5 million Toman per square meter, depending on what is behind it. If someone quotes you a single number, they are either offering a low-grade profile or leaving part of the work out of the estimate.
All prices are approximate, based on the company's supply rates (Namakaran Fakher Engineering Co.) and the Aban 1405 (Oct–Nov 2026) survey, with Tehran as the base; all rates exclude VAT. Daily material prices change and a firm figure is issued only with a detailed estimate for your project — all numbers must be re-confirmed at contract time.
A curtain wall has three main cost items: factory aluminum profile, tempered double-glazed glass, and fabrication and installation labor with substructure. After these three come gaskets, sealants, fittings and engineering (shop drawings). Whichever of these you squeeze, you will see the result a few years later in your water bill and repair costs.
The tables below are the real Aban 1405 (Oct–Nov 2026) ranges. For an exact number, send the drawings; we deliver a detailed estimate — line by line, with no vague lump sum.
Glass curtain wall
Aban 1405 (Oct–Nov 2026)The large gap between the two ends of the range comes from the profile system, the type of double glazing and the facade height.
| Item | Unit | Approx. range (Toman) |
|---|---|---|
| Complete curtain wall installation (material + substructure + installation) | m² | 15,000,000 to 23,000,000 |
| Glass installation only, curtain wall and spider (labor) | m² | 3,500,000 |
| Gaskets, sealants and joint consumables | lm | 400,000 to 600,000 |
Facade aluminum
Aban 1405 (Oct–Nov 2026)Factory-made aluminum profile is the most expensive material item in a curtain wall; a large share of the final price comes from here.
| Item | Unit | Approx. range (Toman) |
|---|---|---|
| Factory aluminum profile (anodized / powder-coated) | kg | 1,200,000 |
| Curtain wall profile consumption (average per m² of facade) | m² | 5,400,000 to 8,500,000 |
| Aluminum louver (with carrier and cover) | lm | 5,000,000 to 6,500,000 |
Building glass — company supply rate
Aban 1405 (Oct–Nov 2026)Price per square meter, standard sizes, VAT excluded. The double-glazed and laminated rates are the company's supply prices; non-standard sizes and special cuts are quoted separately.
| Item | Unit | Approx. range (Toman) |
|---|---|---|
| 5+12+5 tempered double-glazed glass | m² | 3,712,500 |
| 6+12+6 tempered double-glazed glass | m² | 4,031,775 |
| 6 mm tempered glass | m² | 900,000 to 1,400,000 |
| 8 mm tempered glass | m² | 1,400,000 to 2,200,000 |
| 8 mm tinted tempered glass (smoke / bronze) | m² | 1,600,000 to 2,600,000 |
| 10 mm tempered glass | m² | 1,800,000 to 3,000,000 |
Steel and facade substructure
Aban 1405 (Oct–Nov 2026)Priced per kilogram. Substructure weight ranges from roughly 6 to 10 kg per m² of facade depending on the system.
| Item | Unit | Approx. range (Toman) |
|---|---|---|
| Facade substructure — box profile, profiles and 2 mm sheet | kg | 165,000 |
| 15×15 perforated plate (5 or 6 mm) | pc | 400,000 to 500,000 |
| Jenny anchor | pc | 280,000 to 350,000 |
Engineering and overhead
Aban 1405 (Oct–Nov 2026)This share is always in the final total. Wherever you do not see it, something has been cut from the quality of the work.
| Item | Unit | Approx. range (Toman) |
|---|---|---|
| Shop drawings and execution drawings | m² of facade | 250,000 to 600,000 |
| Execution supervision and site management | m² of facade | 200,000 to 500,000 |
| Profit, overhead and company ancillary costs | % of total | 20 |
What pushes the price up or down?
Prices in Tehran and other cities
Curtain wall prices vary slightly between cities; Tehran is the base. In other cities, transport and crew accommodation are added to the estimate.
Prices in Tehran
Tehran is the base of our pricing. Glass and aluminum factories and professional installation crews are all here, so transport costs are low and finding a team is not hard. For high-rise towers, access costs (lifts, suspended platforms) are quoted separately in the estimate.
Iran Mall, Aftab 22 and several other residential towers are among our reference projects in Tehran. Whenever you like, you can visit one of our active sites — all the photos on this website are from real projects too.
Prices in Karaj & Alborz
Karaj and the surrounding towns (Mehrshahr, Fardis, Andisheh) are close to Tehran; the price difference from Tehran is usually small and crew commuting is easy.
Karaj's key technical issue is wind. At height, wind load and the wind-bracing detail must be engineered seriously; this affects the amount of profile and fixings and, ultimately, the price.
Prices in Isfahan
In Isfahan we executed the Isfahan Port project. Isfahan's aluminum industry is strong and factory profile prices show no significant difference from Tehran.
Crew travel and accommodation costs appear separately and transparently in estimates for out-of-town projects. Above roughly 700 m², their effect on the per-square-meter price is usually negligible.
Prices in Mashhad
Mashhad is farther away; material transport and crew accommodation are added to the estimate, and we say this openly from the start — not at the end of the job.
Winter cold limits the waterproofing and sealant schedule. If the project is in the right phase, it is better to close the facade before the cold sets in; we plan the timing together.
Common questions about pricing
Other price pages
Related links
An exact estimate for your project
The tables are the starting point. Send your facade drawing and a few lines of description and we will provide a detailed, firm estimate — free and with no obligation.